Laminar flow cabinets FBB120 IVF
Laminar flow cabinet specially designed for IVF centers. The set is made up of components that are tested in practice and provide optimum works with cells and tissues.
Laminar flow cabinet FBB120-IVF provides excellent protection against particle and bacterial contamination of processed tissues and cells.
According to customer requirements are integrated into the cabinets technologies, such as:
- inverted microscope
- heat plate
- CO2 incubator
- LED lighting
- LCD panel
- and other
LAMINAR FLOW CABINET CONSTRUCTION
Cabinet workspace provides cleanliness class A according to EC GMP Volume 4, Annex 1. Thanks to a low vibration level provide an ergonomically ideal conditions for working with the microscope or micromanipulator.
Airflow is controled by microprocessor unit, providing an efficient and economical operation. Unlike to other similar devices operating costs are reduced by up to tens of percent. Flow rate is programmable in the range of 0.2 to 0.6 m/s. Using a simple button to select full or reduced fan speed.
The housing is protected by special baked powder paint, the work surface is made of high quality stainless steel. The front window and side panels is constructed by safety glass.
Cabinet is fitted with 99.995% high efficiency filter, ie. Class H14. The filter is protected by baked powder paint grid.
- mikroscope NIKON SMZ745 (800, 1000) with heat plate
- incubator CO2 Labotect C16
- LED lighting
The above technological devices are recommended. As a direct manufacturer we are able to provide extra customization and integrate into the cabinet the technology of your choice (including LCD panels, video cameras, microscopes and incubators from other producers, etc.).
MICROSCOPE NIKON SMZxxx WITH HEAT PLATE
Is recommended to integrate the brand Nikon microscope SMZ745 (800, 1000, 1250) or inverted microscope. The microscope achieves state of the arts parameters. In addition to high magnification and high working height and excellent ergonomics.
To work with heat-sensitive biological material is a workstation equipped with a heat plate. This heat plate not only achieves excellent stability, but also homogenity. The upper part of the heat plate is made of the same material as the other working surface, ie, from high-quality stainless steel.
INCUBATOR CO2 LABOTECT C16
For storage cells is in the rear panel of the cabinet integrated an incubator CO2 brand Labotect C16 with the protection of the CO2 atmosphere. This 16-liter incubator is equipped with two shelves and alarm.
For work with DNA is the cabinet fitted with powerful LED lighting, which is friendly to the DNA. For maximum visual comfort, the both side panels are made of glass in the whole surface.
Our solutions are the first choice for important IVF centers within Czech republic, and also in Europe.
Outer dimensions (mm)
|FBB 12 IVF||1180||1250||575||1160||800||565||330|
|FBB 16 IVF||1580||1250||575||1560||800||565||450|
|FBB 20 IVF||1980||1250||575||1960||800||565||650|
|FBB 24 IVF||2380||1250||575||2360||800||565||660|
Note: lf you are looking for a laminar cabinet to cover a micromanipulator or other equipment where vibrations must be kept to a minimum, take a look at the FBB-R laminar flow cabinet.
|Cleanliness class pursuant to US FS 209 E||100 (M 3,5)|
|Cleanliness class pursuant to EN lSO 14644||ISO 5|
|Cleanliness grade A acc. to EU GMP||A|
|Power voltage [V/Hz]||230V / 50Hz|
|Air-flow speed (m.s-1)*||0,40 ± 0,05|
|Noise level at operator workstation (dB(A)) in full mode||max. 53|
|Noise level at operator workstation (dB(A)) in reduce mode||max. 49|
* uživatelsky nastavitelná v rozsahu 0,20 až 0,60 m/s* adjustable by user within the range 0.20 to 0.60 m.s-1
Control system features: modes selection; user selection with various access level; remote control via Android, IOS, Windows;timer for heating surfaces; remote service support, airspeed and temperature setting, light level, main filter pressure level, audit trail,validation and service interval warning, alarm system according to the GMP requirement