Laminar flow cabinet FBB
The cabinet is designed for applications requiring laminar airflow in order to protect the product from particulate and bacterial contamination. The FBB cabinet is a new generation device, equipped with the latest components, security elements and a SMART control system.
- Fully automated operation controlled by a smart control system CR2000 with a 7 ”touch panel, ensuring optimal parameters in the workspace for the selected operating mode, maximum security, remote control, advanced timers, accessory control, email and mobile phone notifications, and much more
- Ergonomic design, large workspace
- Quiet operation thanks to perfect design, good sound insulation, powerful motor with low noise. The operator can therefore concentrate on working for a longer period of time
- Low vibration is achieved by choosing low vibration components, anti-vibration components and special, flexible, fasteners and hinges. Thanks to this, the workstation is also suitable for vibration-sensitive operations, such as working with a microscope, weighing, etc.
- Minimal operating costs, maintenance-free operation, maximum utilization of the absorption capacity of high-efficiency filters
- LED lighting with high luminosity (optionally dimmable)
- Continuous monitoring of main critical parameters such a filter clogging and laminar airflow rate
- Early warning system for filter replacement need, qualification, service, validation, etc.
- Hour meter for filters, fan, etc.
- Audit trail registration of setting changes, alarms and other information
- Temperature sensor in the working space (optional)
The workstation housing is made of steel sheets with a powder coating enamel which is very resistant to abrasion and disinfectants. The worktop is made of first-class stainless steel with a uniform non-reflective matt surface. The side walls of the workspace are glazed in full profile, which increases light level and working comfort. The lighting of the working space is provided by LED lighting with high luminosity. To set the ideal lighting comfort, it is recommended to add a continuous regulation of light intensity 0-100% (optional).
During the design, special attention was paid to technical details, a modern user-friendly interface, a design suitable for laboratories and clean rooms according to EN ISO 14644 clean room technology and GMP standards. Practically it means a smooth design, without sharp edges, minimizing joints, easy cleaning and decontamination, high IP protection in the workspace and other improvements.
The FBB is powered by a high-quality, powerful fan with an energy-saving electronically controlled EC motor. High quality components ensure maintenance-free operation. Compared to standard AC motors, consumption is up to 70% lower. Maximum environmental friendliness is supported by the possibility of using the reduce mode. The fan makes it possible to maintain the required air flow rate with high accuracy over a long period of time, despite the gradual clogging of the filter, and thus make optimal use of its service life.
Air filtration is provided by high-efficiency HEPA filters, class H14 according to EN1822, with an filtration efficiency of 99.999%. The filters have a metal frame, quality seals and a protective grille. The control system continuously monitors their pressure loss. The system is equipped with notification system with two notification levels - warning and action. Warning level means that the HEPA filters would be replaced soon, so it is time to order the filter replacement. Action limit is activated when the filters are clogged and must be replaced immediately. In case the workstation is connected to the Internet, the control system will inform also supervisor and service engineer by email or by push notification to their mobile phone.
The workstation stand has a robust and solid construction made of powder-coated steel, in the same color as the workstation it self, with high resistance to abrasion and disinfectants. The stand has adjustable feet for the possibility of rectifying the unevenness of the surface in the laboratory. To minimize the transmission of vibrations, the stand is equipped with anti-vibration inserts. Thanks to the solid construction and use of anti-vibration inserts, vibration is minimal and significantly contributes to work comfort during vibration-sensitive operations.
The working space is equipped with electrical socket 220 V / 50Hz.
The FBB cabinet works fully automatically according to the set mode. After selecting the mode, the CR2000 control system automatically sets the target parameters of the workstation for the given activity: idle state, operating and reduce mode. The mode is selected via the touch screen or remotely. The system is protected against access by unauthorized persons. The control is user-friendly and clear. A huge advantage is the unification of the control system of all LABOX workstations. Both in terms of service and service and possible training.
Deviations from safe values are signaled both locally acoustically and optically, and are sent to email and / or mobile phone. All settings are made using the large, clear, touch screen of the CR2000 control system. The main page contains information on the operation status of the cabinet, such as the selected mode, current parameters, possible alarm messages with a detailed explanation, and controls for accessories.
Great emphasis is placed on safety. The cabinet, in addition to standard safety elements, is also equipped with a circuit breaker.
Control and management by SMART CR2000
The control and management of the workstation is provided by the state of the art CR2000 smart control system. This system ensures trouble-free operation of the device in 24/7 mode. Control is possible both through the large touch screen and using mobile devices and PC. The touch screen with IPS technology reacts even through laboratory gloves. The display shows all important parameters and states. The speed of the air flow in the working space, temperature in the working space (optional), pressure drop on the filter. These signals are processed by a microprocessor unit, which optimizes the performance of the device accordingly. User interface is intuitive. The control system allows the setting of timers for switching the device on and off, including the selection of the operating mode. Changing alarm settings, timers and other parameters and functions are user-adjustable.
Main functions and advantages of the CR2000 SMART control system
- Complete information about main parameters values, status, alerts and alarms with full detail on the main screen
- Easy mode change (operating, reduce, stand-by) and control of installed accessories
- Remote control (android, iOS, PC)
- Advanced timers
- Sending alarms by email
- Remote service management
- Push notification on mobile phone
- Audittrail – recording of changes, alarms, etc
The firmware is constantly being improved. New functions reflecting new legislative requirements and facilitating work and improving user comfort.
The workstation can be connected to the Internet. This state-of-the-art feature brings freedom of control, time management and significant savings.
Trained users, supervisors and others can be granted remote access. This feature brings another level to complete control of the workstation. In addition to controlling the UV-C lamp, etc., you no longer have to wait for the workstation parameters to stabilize. This includes special accessories such as the heating surface. E.g. with a remote-controlled heating surface, you can save more than 40 minutes.
In the case of a remote connection, the local operator sees all operations performed remotely. This is also successfully used for training, certain service tasks, firmware updates and more.
ALARMS AND PUSH NOTIFICATION NOTICE
Early notification of non-standard operating conditions, service requirements such as filter replacement, impending need for revalidation, maintenance and more. The feature is available for smart devices running Android and Apple iOS.
REMOTE SERVICE SUPPORT
Arranging a remote service support service is available for all workstations controlled by the CR2000 control system, ie FBB, MBB, and others. This service includes remote consultations, advice, if necessary setting parameters, remote check of technical condition, continuous control of critical equipment parameters, such as pressure loss on the filter, etc. The service center is automatically informed about the technical condition of the equipment. It automatically accepts requests for the impending need for filter replacement, validation, etc. Thanks to the remote connection, the utility value of the workstations is significantly increased and the need and time of service interventions is reduced, and the resulting significant reduction in operating costs.
CENTRAL SUPERVISION CENTER (OPTIONAL)
Workstations with CR2000 control can be monitored using a comprehensive monitoring system. Monitoring software can be run on PC with Windows system. One installation can monitor up to 50 workstations. It brings all important information about the status of all installed devices and their main parameters on one screen in real time. In addition to the main physical parameters, such as speed in the work area, pressure drop, temperature, etc., it also displays a status bar for each workstation individually. The status bar is very useful because it provides detailed information about the status, but also describes any non-standard conditions, recommends the replacement of filters, and monitors important service / validation periods.
It is possible to connect to each monitored workstation remotely, if necessary. The operator in the control center sees what the end user sees. The end user is informed of this connection in the status bar.
This system provides an absolute overview of workstations. Combined with remote service support, this is the ultimate solution that saves time, minimizes uncontrolled workstation downtime and thus significantly saves operating costs.
The cabinet can be modified / equipped with the following optional accessories:
- Magnetic tool holder on the rear work wall
upto 19" LCD Screen or all-in-one recessed in the rear working space wall. Convenient for microscope application, visualization or gravimetric preparation
- Armrest height-adjustable ergonomic armrest (across the entire width of the workspace)
- Ionization system for the removal of electric charge from the work area
- Electrical sockets, data sockets, USB sockets, etc.
- Different worktop - material (eg composite), different color, etc.
- Front panel color (blue, white)
- Uninterruptible power supply (UPS) to ensure protection against electric power blackout and disturbances in the power network (including compensation of the local variations in the mains voltage and frequency)
- Cabling organizer - to hide the cabling under the worktop, can be supplied including a socket strip with five inputs
- Shelf, PC compartment, Pull-out keyboard tray
- Technology integration - weighing worktop, microscope, waste containment, bushing, etc.
On customer's request, it is also possible to make individual modifications, such as different material or color design or other possible design modifications, or installation of additional special accessories, according to customer requirements. Please consult any modifications in advance.
The cabinet is designed as maintenance-free. Cabinet control is simple and intuitive. The responsible person of the user has the opportunity to change the basic parameters, timers, and alarm limit settings. Service, firmware update, sensor calibration, etc. is accessible for service technicians of the CR2000 system. Thanks to CR2000, some service, troubleshooting, and training, can be performed remotely.
Qualification and monitoring
As part of the output control and installation, the qualification of the cabinet is performed. At least in the scope of operational qualification (OQ). At the client's request, it can be extended by installation (IQ) and performance qualification (PQ). In accordance with the requirements of standards and regulation, we also perform regular revalidations (qualifications) and monitoring. All tests are performed by an accredited testing laboratory according to EN ISO / IEC 17025.
Transport and installation
The cabinet is supplied and serviced by the manufacturer or certified distributors. The cabinet can be transported through a standard door 80 cm wide.
Lifetime warranty on spare parts availability and service support (at least for 10 years). Standard warranty period is 24 months.
|Type - size||
|FBB - 12||1180||1320||690||1155||875||610||330|
|FBB - 16||1580||1320||690||1555||875||610||450|
|FBB - 20||1980||1320||690||1955||875||610||650|
|FBB - 24||2380||1320||690||2355||875||610||660|
|Cleanliness class acc. to US FS 209 E||100 (M 3,5)|
|Cleanliness class acc.EN lSO 14644||ISO 5|
|Clasification grade acc. to acc. to EU GMP||A|
|Supply voltage [V/Hz]||230V / 50Hz|
|Airflow velocity within work chamber in operation mode (m/s) *||0,40 ± 0,05|
|Airflow velocity within work chamber in reduce mode (m/s) *||0,20 ± 0,05|
|Noise level (dB(A)) during the operation mode||max. 53|
|Noise level (dB(A)) during the reduce mode||max. 49|
* user-adjustable in the range of 0.20 to 0.60 m/s
Features of the CR2000 control system: selection of operating modes; user access rights management; remote control using Android, iOS, timers, etc.; remote service support, setting of alarm limits for airflow speed, pressure, setting of light intensity level (optional), indication of pressure on high-efficiency filter, temperature in working chamber, etc., audit trail, warning on expiration of validation, possibility of connection to a monitoring center
Do you have any further questions? If you have not yet decided or would like to advise on the appropriate type and equipment of the workstation, we will be glad to prepare a tailor-made solution for you.